Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
The NavLight is a bright white LED light that’s visible at night and during the day. It has an input signal that can be controlled by a microcontroller and can be used for USVs, buoys, or underwater with a 1,000 meter depth rating. It has an M14 thread for panel mount installation.
SKU: BR-102340 HS Code: 9405.40.6000This one’s for all the geologists, sedimentologists, pedologists, and arenologists out there. The Newton Sediment Sampler Attachment turns your ROV into a sediment collecting tool to gather sampler from the seafloor!
Two arms replace the jaws on the gripper and hold rubber cups with a total capacity of 300cc, AKA 300mL, 1.25 cups, or 10 fl oz. The rubber cups conform to the sample, particularly if there are any large objects in it, and loosely seal to keep sediment in place while you return to the surface.
Swapping to the sediment sampler only takes a few minutes, so you can switch between the gripper and sampler attachments depending on your mission each day! Check out the sediment sampler guide to learn more about how to install and use the sampler.
| Parameter | Value | |
|---|---|---|
| Performance | ||
| Maximum Rated Depth (seawater) | 1000 m | 3281 ft |
| Design Lifetime¹ | 3 years or 500 cycles to rated depth | |
| Temperature Rating (air) | -25 to 60°C | -13 to 140°F |
| Temperature Rating (water) | 0 to 40°C | 32 to 104°F |
| Electrical | ||
| Supply Voltage² (Vin) | 5–12 V | |
| Power Draw | 2.5 W | |
| Default Mode | Normally on | |
| Signal Protocol | To turn light off, pull signal (yellow) wire to ground | |
| Signal Max Voltage Input | Vin | |
| Signal Max Current Output | 1.1 mA | |
| Light | ||
| Lumens³ | 180 lm | |
| Color Temperature | 6000K | |
| Cables and Connectors | ||
| Cable Length | 400 mm (jacket) 590 mm (red, black conductor) 620 mm (yellow conductor) |
|
| Connectors | Red (positive): 22 AWG ferrule Black (negative): 22 AWG ferrule Yellow (signal): 3 position 0.1" header |
|
| Cable Used | BR-101050 | |
| Compatible WetLink Penetrator (cable end) | M06-4.5mm-LC M10-4.5mm-LC |
|
| Tools | ||
| Compatible Bukhead Wrench | BR-100977-014 | |
| Recommended Installation Torque | 3.5 Nm | |
| Physical | ||
| Recommended Thru Hole Diameter | 14.2 mm | |
| Bulkhead Thread | M14 x 1.5 | |
| Bulkhead Thread Length | 30 mm | |
| Bulkhead/Nut Wrench Flats | 20 mm | |
| Overall Assembled Height From Endcap | 33.7 mm | |
| Overall Outer Diameter | 22 mm | |
| Bulkhead/Lens O-ring Size | 1.5x15 mm Buna-N 70A | |
| Bulkhead/ Plug Material | 6061-T6 Anodized Aluminum | |
| Wetted Materials | Buna-N Rubber Molykote 111 Compound 6061-T6 Anodized Aluminum UV Stabilized Polycarbonate |
|
| In Air Weight (no nut) | 38 g | 1.34 oz |
| ¹ Design life was used to inform testing in an accelerated environment, does not reflect warranty period. ² Light functions up to 6S (25.2V) but signal will not function correctly after 12V. ³ In the horizontal plane. |
||
NAVLIGHT_BR-101284_PUBLIC (.zip)
1. Install the NavLight in an M14 hole or install a 4.5mm-LC WetLink Penetrator at the end of the cable.
2. Connect the red wire to 5–12 VCD and the black wire to ground (-). The NavLight will illuminate when powered on.
3. Pull the yellow signal wire to ground (-) to turn the NavLight off.
The planet’s most flexible and expandable surface vessel
Ready for integration on the BlueBoat
The world's most affordable high-performance ROV
Navigation and imaging sonar for BlueROV2 and other ROVs
The planet’s most flexible and expandable surface vessel
We are what people say we are. Here is a testament to the success we have collaboratively built.
View More
Find products and sign up for a more products of ocean robotics
Get StartedAll rights reserved to Ocean Robotics
Site by Websmartindia
